Sales:
Sales Support
Hi Dan
I have replied straight away both times to the email address you used so I don’t understand why it is not getting to you.
Thank you for your order, you now have a single licence for U-value Professional 2010. Please find detailed below the key codes to enable them to unlock the software. Please keep these safe in case of any problems with the PC(s).
The latest version of the software is available from our website. Go to www.techlit.co.uk/downloads/jsetup990.exe.
Download to your PC and run the installation wizard - OK all screens and click the launch option at the end.
Company Name (for both modules): Gaia Sustainability (this is case sensitive) - make sure you don't copy any spaces either side of the name.
U-value Professional 2010 Key Code: B0E65582FE618E6C1605 (0 is zero, 1 is one)
You can cut and paste the name and code direct into the software. Click on the 'key' icon to bring up the security codes window. Copy and paste the company name into the 'Uvalue product details' space, copy and paste the key code into the space bottom left and then click 'Apply Uvalue key code'. Leave the SAP & PV in Demo mode.
Expiry Date: 24 September 2015
FOR AUSTRALIA: A manual for the use of JPA Designer software is here > JPA Designer User Manual PDF - Australia version. Set up instructions are here > http://www.software-for-construction.com.au/software/Help.html.
To Begin: Click “insert’ and ‘Uvalue calculation’ to begin a calculation and double click on the default name/rename. Go to ‘Edit Project Information’ (postcard icon) and Select ‘Australia’ in the Region menu, then click ‘Set as default’ - this will change U-value figures to R-values. Click the ‘Edit the environmental conditions’ button (˚C&%RH) and select the nearest weather station in the building location menu. Select an ‘Internal humidity class’, internal temp and risk level - click OK. You are now ready to begin creating the calculation.
FOR ASIA: Manual and set up as Australia (above). To Begin: Click “insert’ and ‘Uvalue calculation’ to begin a calculation and double click on the default name/rename. Go to ‘Edit Project Information’ (postcard icon) and Select ‘Asia’ in the Region menu, then click ‘Set as default’. Click the ‘Edit the environmental conditions’ button (˚C&%RH) and select the nearest weather station in the building location menu. Select an ‘Internal humidity class’, internal temp and risk level - click OK. You are now ready to begin creating the calculation.
Any problems let me know. Your receipt is here.
Thanks again.